Fluidmesh 4200 FIBER, Installation And Configuration Manual

Page: 122 / 180

Authentication
Method
Available Inner Authentication Methods
PEAP • MSCHAPV2
• MD5
• GTC
12. Save the RADIUS settings by clicking the Save button.
Alternatively, clear the settings by clicking the Reset button.
6.6.9. NTP Configuration
All Fluidmesh radio transceiver units have a built-in clock.
No manual time-setting controls are provided. Instead, the unit has
network time protocol (NTP) functionality that allows it to synchronize its
time settings with a chosen internet time server. If the unit cannot
synchronize with its primary time server, and the host name of a backup
time server is entered, the unit defaults to synchronizing with the backup
server.
CAUTION
The same NTP configuration must be set for all Fluidmesh
units in the wireless network.
If the same NTP settings are not applied to all units, the
network may encounter timestamp conflicts and/or equipment
malfunctions.
To change the NTP settings, do the following steps:
1. Click the -ntp link under ADVANCED SETTINGS in the left-hand
settings menu.
• The NTP dialog will be shown ( Figure 61 (page 122) ).
Figure 61. Configurator GUI (NTP dialog)
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC Page 122 of 180