Ranger HRC™ operator´s manual – System software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Setup – Maintenance dialog box
Feature
Description
IR/TV video swap
The
IR/TV video swap
feature is used to control the video signal.
•
Yes
: The active video signal is swapped between the two video outputs
on the JPC2 when the operator toggles between IR and TV. If two moni
tors are used, the TV and IR images will move between the monitors.
•
No
: Only the indicator for active channel will move between the monitors.
Default settings
The
Default setting
feature is used to reset parameters, except for example
lists of autoscan points, Baudrate and Protocol, to factory settings.
•
Yes
: The default settings are reset.
•
No
: No action.
Detect devices
The
Detect devices
feature is used to check for system changes and make
required adjustments.
•
Yes
: Opens the
Detect devices
dialog box, see section 7.6.1.6.4.
•
No
: No action.
MMI Control mode
The Joystick Control Unit (JCU) operates with two different settings, with
somewhat different functions for the joystick and the keypad buttons, see
section 6.2.1.
The
MMI Control mode
feature is used to select the JCU setting.
•
Original
•
Alternative
NOTE
: Another commonly used term corresponding to MMI (Man
Machine Interface) is GUI (Graphical User Interface).
