Ranger HRC™ operator´s manual – IR Camera software
0
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Menu choice
Possible choices
Explanation
Adjust image...
(continue)
If
Level
and
Histogram
or
Linear
are
selected in the Image setup dialog box, you
can change span and brightness by using the
navigation pad.You can also carry out an one
shot autoadjust maneuver.
Palette...
• Rainbow
• Rainbow HC
• Gray (white hot)
• Iron
Use the navigation pad to select different IR
palettes.
Press the ENTER button to confirm.
Invert Palette
–
Press the ENTER button to invert the current
palette
Hide graphics
Show graphics
–
When graphics are hidden, this command will
be Show graphics.
8.3.1.1
To consider when auto focusing
To make it possible for the camera to
auto focus properly; there are a few
things to consider.
• The default area that the camera uses when auto focusing is a 80×60
pixel box, centered vertically and horizontally on the screen.
• The camera will have difficulties auto focusing when the image has
low contrasts between different areas.
• Keep the camera steady when auto focusing.
