Ranger HRC™ operator´s manual – System software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Setup – Maintenance dialog box
Feature
Description
Baudrate
The
Baudrate
feature is used to set the communication speed.
•
1200 bps
•
2400 bps
•
4800 bps
•
9600 bps
•
19200 bps
The new Baudrate value will take effect immediately.
NOTE:
If the Baudrate is changed, it will take a few button presses or
joystick movements before the JCU is in sync again.
Device ID
The
Device ID
feature is used to set the device ID:
•
01-31
NOTE:
If the 5x0 protocol (see the
Protocol
feature below) is selected,
the Device ID feature is disabled.
Protocol
The
Protocol
feature is used to select the type of communication protocol:
•
5x0
•
TASS
• Optional protocols, such as PELCO D, are available on request.
The new protocol setting will take effect immediately.
NOTE:
If the protocol is changed, it will take a few button presses or
joystick movements before the JCU is in sync again.
NOTE:
As 5x0 is a pointtopoint protocol, no Device ID can be
selected.
Change password
The
Change password
feature is used to enter a password or change the
existing password for the
Setup – Maintenance
dialog box.
•
Yes
: Opens the
New password
or
Change password
dialog box, see
section 7.6.1.6.2 and 7.6.1.6.3.
•
No
: No action.
