Ranger HRC™ operator´s manual – Optimizing the IR Image
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Figure 12.3 IR Camera top line status indicator.
At the starting point, the top line status indicator 1 (Filter type) shall be
OFF and indicator 3 (Digital zoom factor) shall be blank.
12.1.1.2 Filter Off
Filter is a function that reduces the noise visible in the image in low cont
-
rast scenes. The Filter shall normally be set to OFF. For low contrast sce
-
nes, see section 12.3.
When the Filter is OFF, the top line status indicator number 1 displays
OFF.
Setting Filter OFF
Step
Action
1
Press the ENTER button to enter MENU mode.
2
Select
IR menu
from the
Setup
menu and press the ENTER button. The menu system of
the IR Camera is opened.
3
Select
Setup
and press the ENTER button.
4
Select
Image
… and press the ENTER button. The Image Setup dialog box is displayed.
5
Select
Filter
.
6
Use the LEFT/RIGHT navigation buttons to select
Off
.
7
Press the ENTER button to confirm.
8
Press the CANCEL button to exit the IR Camera menu system.
