Ranger HRC™ operator´s manual – System software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
7.4.1
Pan/Tilt menu when IR is selected
Figure 7.5 Pan/Tilt menu when IR is selected.
Pan/Tilt menu when IR is selected
Feature
Description
Start autoscan
The
Start autoscan
feature is used to enter the system into AUTOSCAN
mode.
Go to next
The
Go to next
feature is used to move the system as fast as possible to the
next point in the currently active scan routine.
Go to previous
The
Go to previous
feature is used to move the system as fast as possible to
the previous point in the currently active scan routine.
Go to position…
The
Go to position…
feature opens the
Go to position
dialog box, see section
7.4.1.1.
Positions…
The
Positions…
feature opens the
Current position list
dialog box, see
section 7.4.1.2. If no current list exists, the
New pos #
dialog box is opened
instead, see section 7.4.1.2.1.
Route sequence…
The
Route sequence…
feature opens the
Route sequence
dialog box, see
section 7.4.1.3.
Store/recall…
The
Store/recall…
feature opens the
Store/recall
dialog box, see section
7.4.1.4.
Park pan/tilt
The
Park pan/tilt
feature is used to send the system to the home position
and enters the system into PARK mode.
