Ranger HRC™ operator´s manual – Optimizing the IR Image
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Selecting Color distribution
Step
Action
1
Select
Setup/IR menu
to open the IR Camera menu system.
2
Select
Setup/Image…/Color distribution
.
3
Use the LEFT/RIGHT navigation buttons to select
Histogram
or
Linear
.
4
Press the ENTER button to confirm.
5
Press the CANCEL button to exit the IR Camera menu system.
Figure 12.10 Top line status indicator
Top line status indicator 5 indicates the selected color distribution mode
(LIN or HIST).
12.2.9 DDE Control
DDE (
Digital Detail Enhancement) is an adjustment mode that enhances
the visibility of details in the scene.
DDE Control
is a feature that allows
tuning of the DDE filter, which gives a continuous shift from less to more
detail enhancement.
The DDE Control setting under normal conditions is a matter of personal
taste. Test values in the range of 40-65 to find the setting that suits you
best.
NOTE
: For typical settings in low and high contrast scenes, please refer to section 12.3.
NOTE
: To use the JCU for adjustments of the DDE Control value, as described below, the
Alternative setting of the JCU must be selected. This is done in the Setup – Maintenance
dialog box, see section 7.6.1.6.
