FLIR Ranger HRC MS, Operator'S Manual

Page: 47 / 260

Ranger HRC™ operator´s manual – Joystick Control Unit
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
6.2.2 AUTOSCAN mode
The AUTOSCAN mode is entered by pressing the
SCN
button in NOR -
MAL or PARK mode. (­If no autoscan points have been defined, the system
will stay in NORMAL or PARK mode when the
SCN
button is pressed.)
JCU joystick and keypad – AUTOSCAN mode
Feature Description
Joystick
Move the joystick in any direction to enter NORMAL mode.
FCN Press the FCN button to enter PROG POSITION mode.
SCN No function in AUTOSCAN mode.
ID Reserved for future capabilities.
TV/IR Press the TV/IR button to toggle between TV imaging and IR imaging.
INV
Press the
INV
button to toggle between White hot and Black hot IR palette.
C Press the C button to enter NORMAL mode.
NUC Press the NUC button < 1 second to perform an Internal NUC.
Press the NUC button > 1 second to perform a one­shot auto focus adjustment.
Press the FCN + NUC buttons < 1 second to perform an External NUC against the
lens cover.
Press the FCN + NUC buttons > 1 second to go to the fixed focus position.
Press the C + NUC buttons < 1 second to perform an External NUC against the
scene.
Press the C + NUC buttons > 1 second to perform a one­shot auto focus adjustment.
NOTE
: The default behavior (above) of the
NUC
and
FCN
+
NUC
buttons can
be inverted in the
Setup-Image dialog box, see section 7.6.1.1.
PRK Press the PRK button < 1 second to send the system to the home position. If the
PRK button is pressed < 1 second again when the system is in home position, the
lens cover of the IR Camera will be closed and PARK mode will be entered, see
section 5.1.3.
Press the PRK button > 1 second to send the system to the mechanical home posi­
tion, close the lens cover of the IR Camera and enter PARK mode, see section 5.1.3.
NOTE : At system start up, the PRK button has to be pressed for more than 3
seconds to activate the Pan/Tilt unit.
No function in AUTOSCAN mode.