Ranger HRC™ operator´s manual – Joystick Control Unit
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
JCU joystick and keypad – NORMAL mode
Feature
ORIGINAL setting
ALTERNATIVE setting
PRK
Press the
PRK
button < 1 second to send the system to the home position. If the
PRK
button is pressed < 1 second again when the system is in home position,
the lens cover of the IR Camera will be closed and PARK mode will be entered,
see section 5.1.3.
Press the
PRK
button > 1 second to send the system to the mechanical home
position, close the lens cover of the IR Camera and enter PARK mode, see
section 5.1.3.
NOTE
: At system start up, the
PRK
button has to be pressed for more
than 3 seconds to activate the Pan/Tilt unit.
Press the
button to zoom in.
Press the
button to zoom out.
When the adjustment mode is set to
DDE (linear or full), see section 11.3.2:
Press and hold down the
button to
increase the DDE value.
Press and hold down the
button to
decrease the DDE value.
If the adjustment mode is set to AUTO
(linear of full) or MANUAL, the
and
buttons have no function.
Press and hold down the
FCN
+
buttons to increase the level value.
Press and hold down the
FCN
+
buttons to decrease the level value.
NOTE
: When the level value is changed, the system enters the Manual
adjustment mode, see section 11.3.2.
Press the
C
+
buttons to manually open the lens cover.
Press the
C
+
buttons to manually close the lens cover.
Press the
button to go to previous active autoscan point position.
Press the
button to go to next active autoscan point position.
If there are no autoscan points, there will be no action.
NOTE
: This function of the buttons can be disabled, see section 7.6.1.3.
Press and hold down the
FCN
+
buttons to decrease the span value.
Press and hold down the
FCN
+
buttons to increase the span value.
NOTE
: When the span value is changed, the system enters the Manual
adjustment mode, see section 11.3.2.
FRZ
Press the
FRZ
button to freeze/unfreeze the image.
ENTER
Press the ENTER button to enter MENU mode.
