Ranger HRC™ operator´s manual – System operation
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
11.1.3 Remote power control
The JCU can be used to remotely control the power. If the system is equip
-
ped with a Remote Power Controller unit, the entire system will be turned
on/off. Otherwise, the IR and TV cameras and the LRF, DMC and GPS
units will be turned on/off.
NOTE:
The Power Box or Power Supply unit has to be turned on; otherwise it is not pos
sible to use the remote power control function.
Remotely turning power on
Step
Action
1
Press and hold down the
FCN
button.
2
While the
FCN
button is held down, press and hold down the ENTER button for more
than 3 seconds to turn on the power.
Remotely turning power off
Step
Action
1
Press and hold down the
FCN
button.
2
While the
FCN
button is held down, press and hold down the
FRZ
button for more than
3 seconds to initiate the power off command.
NOTE
: The system will be parked before the power off command is executed,
which typically means that the power is turned off after 10 seconds.
