Ranger HRC™ operator´s manual – Optimizing the IR Image
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
12.2.4.1 Internal NUC
Internal NUC
Step
Action
1
Press button
NUC
< 1
second
to perform an Internal NUC.
NOTE
: If the default setting for the
NUC
button has been changed (
Setup-Image
dialog box, see section 7.6.1.1), the
NUC
button shall be pressed > 1 second to
perform an Internal NUC.
As an alternative to using the JCU as described above, the IR Camera
menu system can be used:
Internal NUC
Step
Action
1
Select
Setup/IR menu
to open the IR Camera menu system.
2
Select
Setup/Image…/Shutter
.
3
Use the LEFT/RIGHT navigation buttons to select
Internal
.
4
Press the ENTER button to confirm.
5
Press the ENTER button to reopen the IR Camera menu system.
6
Select
Image…/NUC
.
7
Press the LEFT or RIGHT navigation button or ENTER to perform a NUC.
8
Press the CANCEL button to exit the IR Camera menu system.
12.2.4.2 External NUC against lens cover
External NUC against lens cover
Step
Action
1
Press buttons
FCN
+
NUC
< 1
second
to perform an External NUC against the lens
cover.
NOTE
: If the default setting for the
FCN
+
NUC
button has been changed (
Setup-
Image
dialog box, see section 7.6.1.1), the
FCN
+
NUC
buttons shall be pressed
> 1 second to perform an External NUC.
