Ranger HRC™ operator´s manual – Hardware installation
0
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
9.2.2
System components
The Ranger HRC MS system can be configured for stand-alone opera-
tion or for operation in an IP network with multiple systems. Cable con-
nections for three typical stand-alone configurations are described in the
sections below.
NOTE
: The control of the video channels (TV and IR) is defined via a setting in the System
Software. The recommended setting depends on the number of connected video moni
tors. For detailed instructions, see section 10.1.
For information about connections in an IP network configuration, see
section 15.9.
