Ranger HRC™ operator´s manual – System software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
7.6.1.2.1
Setup – GUI Size dialog box
The
Setup – GUI size
dialog box is used to select GUI size.
The crosshair reticle, the FOV brackets and the autoscan point indicators
are not affected by the change of GUI size.
Figure 7.20 Setup – GUI size dialog box.
Setup – GUI Size dialog box
Feature
Description
Preset mode
The
Preset mode
feature is used to select GUI size mode.
•
Full
: The full area is used to display the system software graphics. This
setting keeps as much as possible of the video image free from overlaid
information. However, many monitors cut the video image close to the
edges. With such a monitor, some of the graphics may not be visible with
this setting.
•
Compressed
: The edges of the area where the system software graphics
is displayed are adjusted to allow all graphics to be visible. This is a fixed
setting that fits most monitors.
•
Custom
: Enables manual settings of Left, Top, Right and Bottom edges.
Left/Top/Right/
Bottom edge
The
Left/Top/Right/Bottom edge
items are used to adjust the edges of the
area where the system software graphics is displayed. The edges can only
be adjusted when
Custom
is selected.
