Ranger HRC™ operator´s manual – Basic settings
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
10.1.3 IR/TV video swap setting
IR/TV video swap setting
Step
Action
1
Press the ENTER button to enter MENU mode.
2
Select
Maintenance …
from the
Setup
menu and press the ENTER button. The
Setup
– Maintenance
dialog box is displayed.
3
Select
IR/TV video swap
.
4 a
If one video monitor is connected, use the LEFT/RIGHT navigation buttons to select
Yes
.
4 b
If two video monitors are connected, use the LEFT/RIGHT navigation buttons to select
No
.
5
Press the ENTER button to confirm and to exit MENU mode.
10.2
Joystick Control Unit settings
The functionality of the Joystick Control Unit (JCU) depends to some ex-
tent on settings in the System Software.
10.2.1 Original or Alternative setting
The JCU operates with two different settings – Original and Alternative –
with somewhat different functions for the joystick and the keypad buttons.
For details on the functionality of the JCU with Original and Alternative
setting, see section 6.2.1.
Original/Alternative setting
Step
Action
1
Press the ENTER button to enter MENU mode.
2
Select
Maintenance …
from the
Setup
menu and press the ENTER button. The
Setup –
Maintenance
dialog box is displayed.
3
Select
MMI Control mode
.
4
Use the LEFT/RIGHT navigation buttons to select the desired setting of the JCU –
Original
or
Alternative
.
5
Press the ENTER button to confirm and to exit MENU mode.
