FLIR Ranger HRC MS, Operator'S Manual

Page: 198 / 260

Ranger HRC™ operator´s manual – Optimizing the IR Image
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Selecting Filter type
Step Action
1 Select Setup/IR menu to open the IR Camera menu system.
2 Select Setup/Image…/Filter .
3
Use the LEFT/RIGHT navigation buttons to select
Low
,
High
or
Off
.
4 Press the ENTER button to confirm.
5
Press the CANCEL button to exit the IR Camera menu system.
12.3.2 Focus
Typical settings:

Low contrast Manual focus

Normal contrast Auto focus

High contrast Auto focus
12.3.2.1 Manual focus
Manual focusing
Step ORIGINAL setting ALTERNATIVE setting
1 Turn the joystick collar to the left/right to focus
near/far.
Press button FCN and turn the joystick
collar to the left/right to focus near/far.
12.3.2.2 Auto focus
Auto focusing
Step ORIGINAL setting ALTERNATIVE setting
1 Verify that the target is in the center of the image.
2 Keep the camera steady when auto focusing.
Press button NUC > 1
second
to perform
a one­shot auto focus adjustment.
Press the joystick button < 1
second
to
perform a one­shot auto focus adjustment.
NOTE : If the default setting for the
NUC button has been changed ( Setup-
Image dialog box, see section 7.6.1.1),
the NUC button shall be pressed < 1
second to auto focus.
The NUC button can also be used to auto
focus, as for the Original setting.