FLIR Ranger HRC MS, Operator'S Manual

Page: 73 / 260

Ranger HRC™ operator´s manual – System software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Setup – Image dialog box
Feature Description
Nuc button •
AF/NUC
:
Press button NUC < 1 second to perform a on­shot auto focus adjust­
ment
Press button NUC > 1 second, to perform an Internal NUC
and
Press buttons FCN + NUC < 1 second to go to the fixed focus position.
Press buttons FCN + NUC > 1 second to perform an External NUC.
and
Press the C + NUC buttons < 1 second to perform a one­shot auto focus
adjustment.
Press the C + NUC buttons > 1 second to perform an External NUC
against the scene.
Adjust DDE The Adjust DDE feature is used to adjust the DDE Control value.
• Yes : Opens the DDE dialog box, see section 7.6.1.1.1.
• No : No action.
Preset focus
distance
The Preset focus distance feature is used to set the fixed focus distance.
If auto focus is not possible, for example when the image has low contrasts
between different areas, the system will focus to the fixed focus distance
instead.
7.6.1.1.1 DDE dialog box
The
DDE
dialog box is used to adjust the DDE Control value.
Figure 7.18 DDE dialog box.
For more information about DDE Control, see section 5.2.6 DDE – Digital
Detail Enhancement.