Installation Instructions
Seite 84 Panda PMS 8.000 NE - 42 NE Manual.R04 - Capture D: Installation Instructions
8.7.08
D.4 The Freshwater Coolant Circuit
D.4.1 Position of the external cooling water expansion tank
Position of the external cooling water
expansion tank
The Panda generator is normally supplied
with an additional, external cooling water
expansion tank. This tank must be instal-
led in such a way that its lower edge is at
least 500 mm more highly arranged than
the upper edge of the sound cover.
If this 500 mm should be fallen below, i.e.
the cooling water expansion tank is lower
installed, very large problems can occur
with filling and ventilating. Extend and dis-
place the hose lines to the outside or pos-
sibly even up to the deck.
Fig. D.4.1-1: Position of the External Cooling Water Expansion Tank
ATTENTION! The external cooling water expansion tank may be filled
only up to the lower edge of the lower tension tape (see note "max") in
the maximum filling level in cold condition.
