The Panda Generator
Panda_12-4KU_HD-PMS_eng - Chapter A: The Panda Generator Page 37
Oil pressure switch
In order to be able to monitore the lubrica-
ting oil system, an oil pressure switch is
built into the system. The oil pressure
switch is on the back of the engine (next to
the DC-alternator).
Fig. A.3.8-6: Oil pressure switch
Failure bypass switch
The failure bypass switch offers the possi-
bility of starting the generator if the electri-
cal control switched off due to an error in
the cooling system by overheating.
Fig. A.3.8-7: Failure bypass switch
A.3.9 Components of the oil circuit
Oil filler neck with cap
Normally the filler neck for the engine oil
is on the top side of the valve cover. At
numerous generator types a second filler
neck is attached additionally at the opera-
ting side. Please pay attention that the fil-
ler necks are always well locked after
filling in engine oil.
Consider also the references to the
engine oil specification.
Fig. A.3.9-1: Oil filler neck with cap
