The Panda Generator
Panda_12-4KU_HD-PMS_eng - Chapter A: The Panda Generator Page 39
A.3.10External components
External fuel pump
The Panda generator is always supplied
with an external, electrical (12V of DC) fuel
pump. The fuel pump must be always
installed in the proximity of the tank. The
electrical connections with the lead plan-
ned for it are before-installed at the genera-
tor. Since the suction height and the supply
pressure are limited, it can be sometimes
possible that for reinforcement a second
pump must be installed.
Fig. A.3.10-1: External fuel pump
AC-Control box
At operating the generator the operating
voltage of 120/230 and/or 230/400V lies at
the AC-Control box. It must be guaranteed
that the generator cannot be inadvertently
started, if the Control box is opened. For
this reason the negative pole of the starter
battery is to be disclamped with all work on
the electrical system.
Fig. A.3.10-2: AC-Control box
Voltage control VCS
The figure shows the control printed board
for the VCS voltage regulation. Over this
control printed board the control signals
are given for the actuator for speed regula-
tion. On the VCS board are also adjust-
ment
possibilities
for
the
control
parameters.
Fig. A.3.10-3: VCS
