Generator Failure
Seite 56 Panda PMS 8.000 NE - 42 NE Manual.R04 - Kapitel B: Generator Failure
8.7.08
1. Fuel solenoid valve
2. Fuel injector
3. Ventilation screw
Fig. B.6.1-1: Fuel Solenoid Valve
B.6.2 Re-start with Failure Bypass Switch
The start-failure bypass switch enables an immediate restart facility of the generator, should it cut
out, even if this was caused by over-heating. There is normally a requirement to wait until the
motor has cooled down to the correct temperature. This can last for several hours in certain cir-
cumstances, since the generator is enclosed in a sound-insulated casing, which prevents heat
loss.
Failure Bypass Swtich
Fig. B.6.2-1: Failure Bypass Switch
1
2
3
