Fimap GMG PRO, Operator Interface Manual

Page: 18 / 68

GENERAL SETS MENU (PARAMETERS)
Proceed as follows to view the “GENERAL SETS” menu:
1. Display the "GENERAL MACHINE SETTINGS" menu, see “DISPLAY BRIGHTNESS MENU (GENERAL
MAIN)” on page 14 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Using buttons (1) and (2) ( Fig.1 ) select the "GENERAL SETS" screen ( Fig.2 ) and press button (3) to confirm
the display ( Fig.1 ).
2
1
1
General
sets...
2
-SETTINGS-
N.B.: in the parameters menu, the display is only shown in English.
The following sub-menus can be selected on the General menu screen:
MAIN
Used to change the language of the control display - see “LANGUAGE SELECTION MENU
(GENERAL MAIN)” on page 19 .
In the MAIN sub-menu it is possible to adjust the display contrast, see “DISPLAY TUNE
MENU (GENERAL MAIN)” on page 20 .
In the MAIN sub-menu it is possible to adjust the display brightness, see “DISPLAY
BRIGHTNESS MENU (GENERAL MAIN)” on page 21 .
BATTERY
Used to select the type of battery that powers the machine - see “BATTERY TYPE MENU
(GENERAL BATTERY)” on page 22 .
Used to modify the discharge curve of the “CUSTOM” battery type - see “CUSTOM LEVEL
MENU (GENERAL BATTERY)” on page 23 .
HOURMETER
Used to change the type of hour meter selected on the main machine display - see
“VISUALIZED HMT MENU (GENERAL HOURMETER)” on page 24 .
Used to reset the partial hour meter - see “HMT PARTIAL RESET MENU (GENERAL
HOURMETER)” on page 25 .
ACCESS MODE
Used to change the CUSTOMER level password - see “PASSWORD 3 CUSTOM MENU
(GENERAL ACCESS MODE)” on page 26 .
Used to change the USER level password - see “PASSWORD 4 USER MENU (GENERAL
ACCESS MODE)” on page 27 .
Used to change the PIN level password - see “PASSWORD 5 PIN MENU (GENERAL
ACCESSMODE)” on page 27 .
Used to activate or deactivate the password request for accessing the “SETTINGS” menu -
see “PASSWORD PROTECTION USER MENU (GENERAL ACCESSMODE)” on page 28 .
Used to activate or deactivate the password request for machine use - see “PASSWORD
PROTECTION PIN MENU (GENERAL ACCESSMODE)” on page 29 .
SERVICE
It is not possible to access it because the “CUSTOMER” level password is not enabled to
access it.
Page 18