Fimap GMG PRO, Operator Interface Manual

Page: 32 / 68

2 4
1 3
6
1
General
Config
Hazard lights:
No
2
5
N.B.: By selecting “NO” the hazard lights function will not be active. In this way, both the headlights and the
rear lights will be active while working, but will not blink.
N.B.: By selecting “YES” the hazard lights function will be active. In this way, both the headlights and the rear
lights will be active while working with a blinking light effect.
MANUAL OPERATION ENABLE MENU (GENERAL CONFIG)
To manage the side brush "MANUAL OPERATION ENABLE" function, carry out the following:
1. Display the "GENERAL MACHINE SETTINGS" menu, see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “GENERAL SETS” menu - see “GENERAL SETS MENU (PARAMETERS)” on page 18 .
5. Display the “CONFIG” menu, see “CONFIG MENU (GENERAL SETS)” on page 29 .
6. Using buttons (1) and (2) (
Fig.1
) select the "MANUAL OPERATION ENABLE" screen (
Fig.2
).
7. As soon as the “MANUAL OPERATION ENABLE” screen appears (
Fig.2
), use the buttons (3) and (4) (
Fig.1
)
to select the management of the “MANUAL MODE” program (see “MANUAL MODE WORKING PROGRAM”
on page 63 of the machine use and maintenance manual).
N.B.:
the selected parameter will be visible in the text string (5) in the lower part of the screen (
Fig.2
).
8. Confirm the selected hour meter by pressing the button (6) (
Fig.1
).
2 4
1 3
6
1
General
Config
Manual operation enable:
Yes
2
5
N.B.: Selecting "No" disables the MANUAL MODE working program, while selecting "Yes" enables the
program.
Page 32