Fimap GMG PRO, Operator Interface Manual

Page: 29 / 68

PASSWORD PROTECTION PIN MENU (GENERAL ACCESSMODE)
Proceed as follows to activate or deactivate the PIN level password request, to access machine use:
1. Display the "GENERAL MACHINE SETTINGS" menu, see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “GENERAL SETS” menu - see “GENERAL SETS MENU (PARAMETERS)” on page 18 .
5. Display the “ACCESSMODE” menu - see “ACCESS MODE MENU (GENERAL SETS)” on page 26 .
6. Using buttons (1) and (2) ( Fig.1 ) select the "PASSWORD PROTECTION PIN" screen ( Fig.2 ).
7. As soon as the “PASSWORD PROTECTION PIN” screen ( Fig.2 ) is displayed, use buttons (3) and (4) ( Fig.1 )
to select the possibility to request the level 5 password (PIN) to access the use of the machine.
N.B.: the selected value will be visible in the text string (5) in the lower part of the screen ( Fig.2 ).
8. Confirm the selection by pressing the button (6) ( Fig.1 ).
General
AccessMode
0
Password protection PIN:
min:0 max:1
2
5
2 4
1 3
6
1
N.B.: By selecting “0”, the password will not be active, therefore the machine can be used without entering a
password after it starts.
N.B.: By selecting “1”, the password is active, therefore to be able to use the machine a PIN password must
be entered after the machine starts (the factory value is 123).
CONFIG MENU (GENERAL SETS)
Proceed as follows to display the “SERVICE” menu:
1. Display the "GENERAL MACHINE SETTINGS" menu, see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “GENERAL SETS” menu - see “GENERAL SETS MENU (PARAMETERS)” on page 18 .
5. Using buttons (1) and (2) ( Fig.1 ) select the "GENERAL Config" screen ( Fig.2 ) and press button (3) to confirm
the display ( Fig.1 ).
Page 29