Fimap GMG PRO, Operator Interface Manual

Page: 17 / 68

PARAMETERS MENU (SERVICE)
Proceed as follows to view the “PARAMETERS” menu:
1. Display the "GENERAL MACHINE SETTINGS" menu, see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
3. Using buttons (1) and (2) ( Fig.1 ) select the "PARAMETERS" screen ( Fig.2 ) and press button (3) to confirm the
display ( Fig.1 ).
2
1
3
1
2
N.B.: in the parameters menu, the display is only shown in English.
The following sub-menus can be selected on the parameters menu screen:
General Sets
This is used to display and/or change the general machine parameters, see “GENERAL SETS
MENU (PARAMETERS)” on page 18 .
Brush Sets
This is used to display and/or change the parameters of the machine's scrubbing system, see
“BRUSHES SETS MENU (PARAMETERS)” on page 34 .
Pump Sets
This is used to display and/or change the parameters of the machine's water unit, see “PUMP
SETS MENU (PARAMETERS)” on page 43 .
Vacuum Sets
This is used to display and/or change the parameters of the machine's suction unit, see
“VACUUM SETS MENU (PARAMETERS)” on page 46 .
Optional
Sets
This is used to display and/or change the parameters inherent to the various machine optionals,
see “OPTIONAL SETS MENU (PARAMETERS)” on page 50 .
Actuator
Sets
This is used to display and/or change the parameters inherent to the actuators in the machine,
see “ACTUATOR SETS MENU (PARAMETERS)” on page 54 .
Traction Sets
This is used to display and/or change the parameters of the machine's drive unit, see
“TRACTION SETS MENU (PARAMETERS)” on page 56 .
Page 17