Fimap GMG PRO, Operator Interface Manual

Page: 43 / 68

PUMP SETS MENU (PARAMETERS)
Proceed as follows to view the “PUMP SETS” menu:
1. Display the "MACHINE BRUSHES SETTINGS" menu - see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Using buttons (1) and (2) ( Fig.1 ) select the "PUMP SETS" screen ( Fig.2 ) and press button (3) to confirm the
display ( Fig.1 ).
2
1
1
Pump
sets...
2
-SETTINGS-
N.B.: in the parameters menu, the display is only shown in English.
The following sub-menus can be selected on the pump menu screen:
PUMP WATER
Used to modify the parameter relating to the dosing level of the detergent solution - see
“PUMP LEVEL MENU ( WATER PUMP)” on page 44 .
PUMP
CHEMICAL
Used to modify the parameter relating to the percentage of chemical product dispensed
(valid only for programs that do not allow the parameters to be changed manually) - see
“CHEMICAL PERCENTAGE MENU (CHEMICAL PUMP)” on page 45 .
WATER MENU (PUMP SETS)
Proceed as follows to view the “WATER” menu:
1. Display the "MACHINE BRUSHES SETTINGS" menu - see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “PUMP SETS” menu - see “PUMP SETS MENU (PARAMETERS)” on page 43 .
5. Using buttons (1) and (2) ( Fig.1 ) select the "WATER PUMP" screen ( Fig.2 ) and press button (3) to confirm the
display ( Fig.1 ).
2
1
1
Water
2
Pump
N.B.: On the water menu screen, it is possible to change the parameters of the three performance levels of
the detergent solution performance.
Page 43