Fimap GMG PRO, Operator Interface Manual

Page: 9 / 68

SETTINGS MENU
Proceed as follows to view the “GENERAL MACHINE SETTINGS” menu:
1. Sit on the driver’s seat.
2. Press buttons (1) and (2) ( Fig. 1 ) and keeping them pressed turn on the machine, turn the key (3) a quarter of
a turn clockwise ( Fig.2 ).
3. After a few seconds the “GENERAL MACHINE SETTINGS” menu will be loaded.
N.B.: when navigating the configuration menu, all the machine functions, including traction, are deactivated.
1 2
1 2
3
the following adjustments can be made in the "GENERAL MACHINE SETTINGS" screen:
Language
Selection
This allows changing the language of the control display, see “CHANGING THE DISPLAY
LANGUAGE” on page 10 .
Battery Type
Allows to select the type of battery that powers the machine (see “CHANGING THE
MACHINE POWER SUPPLY BATTERY TYPE” on page 11 ).
Percentage
Chemical
Allows to change the amount of detergent present in the machine's water system, see
“CHANGING THE PERCENTAGE OF CHEMICAL PRODUCT IN THE DETERGENT
SOLUTION” on page 13 .
Display Tune
Used to alter the brightness of the control display - see “CHANGING THE CONTROL
DISPLAY BRIGHTNESS” on page 14 .
Display
Brightness
Used to alter the contrast of the control display - see “CHANGING THE CONTROL DISPLAY
CONTRAST” on page 15 .
N.B.: the detergent menu is visible only if the machine is set up for the automatic dosing system of the
chemical product (FSS).
N.B.: changing the parameter in the detergent menu influences those programs where the quantity of
detergent is set automatically.
Page 9