CHANGING THE PERCENTAGE OF CHEMICAL PRODUCT IN THE DETERGENT
SOLUTION
For the machines that have the automatic management system of the chemical product, the modification of the
percentage of chemical product must be carried out as follows:
1.
Display the "GENERAL MACHINE SETTINGS" menu, see
2.
Display the “CHEMICAL PERCENTAGE” menu, see
“CHEMICAL PERCENTAGE MENU” on page 12
.
3.
As soon as the “CHEMICAL PERCENTAGE” screen (
Fig.2
) is displayed, select the percentage of chemical
product required in the detergent solution using buttons (1) and (2) (
Fig.1
).
N.B.:
the percentage of chemical product will be visible in the text string (3) in the lower part of the screen
(
Fig.2
).
4.
Confirm the selected percentage by pressing the button (4) (
Fig.1
).
2
1
4
1
General
Main
2.0
[%]
Chemical percentage:
min:0.5
max:3.0
2
3
N.B.:
the increase in the percentage takes place in steps of 0.5% at a time, the minimum allowed value is 0.5
while the maximum allowed value is 3.0.
N.B.:
changing this parameter will influence those programs whose quantity of detergent is set automatically.
DISPLAY TUNE MENU (GENERAL MAIN)
To adjust the display contrast, proceed as follows:
1.
Display the "GENERAL MACHINE SETTINGS" menu, see
2.
From the "GENERAL MACHINE SETTINGS" menu, use the buttons (1) and (2) (
Fig.1
) to select the screen
dedicated to the "DISPLAY TUNE" menu (
Fig.2
).
N.B.:
the brightness of the control display can be regulated via the “DISPLAY TUNE MENU”.
2
1
1
General
Main
15
Display tune:
min:0
max:50
2
Page 13