Fimap GMG PRO, Operator Interface Manual

Page: 52 / 68

OPT. SWEEP MENU (OPTIONAL SETS)
To view the “OPT SWEEP” menu, proceed as follows:
1. Display the "MACHINE BRUSHES SETTINGS" menu - see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “OPTIONAL SETS” menu - see “OPTIONAL SETS MENU (PARAMETERS)” on page 50 .
5. Use buttons (1) and (2) ( Fig.1 ) to select the "OPTIONAL Opt. Sweep" screen ( Fig.2 ), then press button (3) to
confirm the display ( Fig.1 ).
2
1
1
Opt. Sweep
2
Optional accessories
RESET DELAY MENU (OPTIONAL OPT. SWEEP)
Proceed as follows to change the “RESET DELAY” parameter in the brush motor menu:
1. Display the "MACHINE BRUSHES SETTINGS" menu - see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “OPTIONAL SETS” menu - see “OPTIONAL SETS MENU (PARAMETERS)” on page 50 .
5. Display the “OPT. SWEEP” menu - see “OPT. SWEEP MENU (OPTIONAL SETS)” on page 52 .
6. Using buttons (1) and (2) ( Fig.1 ) select the "RESET DELAY" screen ( Fig.2 ).
7. As soon as the “RESET DELAY” screen ( Fig.2 ) is displayed, select the delay in seconds before the actuator
brings the side brush to the "raised from the floor" position using buttons (3) and (4) ( Fig.1 ).
N.B.: the selected value will be visible in the text string (5) in the lower part of the screen ( Fig.2 ).
8. Confirm the selection by pressing the button (6) ( Fig.1 ).
Optional accessories
Opt. Sweep
20 [s]
Reset delay:
min:1 max:300
2
5
2 4
1 3
6
1
Page 52