Fimap GMG PRO, Operator Interface Manual

Page: 41 / 68

PRESSURE RANGE MENU (BRUSHES SWEEP MOT)
Proceed as follows to change the “PRESSURE RANGE” parameter in the brush motor menu:
1. Display the "MACHINE BRUSHES SETTINGS" menu - see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “BRUSHES SETS” menu - see “BRUSHES SETS MENU (PARAMETERS)” on page 34 .
5. Display the “SWEEP BRUSH” menu - see “SWEEP BRUSH MENU (GENERAL SETS)” on page 38 .
6. Using buttons (1) and (2) ( Fig.1 ) select the "PRESSURE RANGE" screen ( Fig.2 ).
7. As soon as the “PRESSURE LEVEL” screen ( Fig.2 ) is displayed, select the value of the maximum allowed
range of the current absorbed by the pressure levels before the tripping of the ammeter resistance protection
using buttons (3) and (4) ( Fig.1 ).
N.B.: the selected value will be visible in the text string (5) in the lower part of the screen ( Fig.2 ).
8. Confirm the selection by pressing the button (6) ( Fig.1 ).
N.B.: the selected value will be visible in the text string (5) in the lower part of the screen ( Fig.2 ).
8. Confirm the selection by pressing the button (6) ( Fig.1 ).
Brushes
Sweep Mot
45 [A]
Pressure lev. 1:
min:10 max:100
2
5
2 4
1 3
6
1
N.B.: the “PRESSURE LEVEL” parameter indicates the current absorbed by the sweeping brush head while
working.
N.B.: the “PRESSURE LEVEL” parameter is expressed in amperes (A). The numerical value is between a
minimum of 10 and a maximum of 100, and the selectable increment is one unit.
N.B.: the “PRESSURE LEVEL” parameter (Sum) is set in the factory at a value of 30.
Page 41