Fimap GMG PRO, Operator Interface Manual

Page: 21 / 68

DISPLAY BRIGHTNESS MENU (GENERAL MAIN)
To adjust the display brightness, proceed as follows:
1. Display the "GENERAL MACHINE SETTINGS" menu, see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “GENERAL SETS” menu - see “GENERAL SETS MENU (PARAMETERS)” on page 18 .
5. Display the “MAIN” menu, see “MAIN MENU (GENERAL SETS)” on page 19 .
6. Using buttons (1) and (2) ( Fig.1 ) select the "DISPLAY TUNE" screen ( Fig.2 ).
7. As soon as the “DISPLAY BRIGHTNESS” screen ( Fig.2 ) is displayed, adjust the display brightness using
buttons (3) and (4) ( Fig.1 ).
N.B.: the brightness level of the display will be visible in the text string (5) in the lower part of the screen
( Fig.2 ).
N.B.: the increase in the contrast level takes place in steps of 1 unit at a time, the minimum allowed value is
0 while the maximum allowed value is 10.
8. Confirm the brightness level of the display by pressing the button (6) ( Fig.1 ).
2 4
1 3
6
1
General
Main
15
Display Brightness:
min:0 max:10
2
5
2 4
1 3
6
1
General
Main
15
Display tune:
min:0 max:50
2
5
Page 21