Fimap GMG PRO, Operator Interface Manual

Page: 19 / 68

CONFIG
Used to manage the side brush - see “SIDE BRUSH MENU (GENERAL CONFIG)” on page
30 .
Used to manage the machine anti-collision system - see “ANTI-COLLISION MENU
(GENERAL CONFIG)” on page 30 .
Used to activate or deactivate the HAZARD LIGHTS function - see “HAZARD LIGHTS MENU
(GENERAL CONFIG)” on page 31 .
Used to activate or deactivate the MANUAL MODE working program - see “MANUAL
OPERATION ENABLE MENU (GENERAL CONFIG)” on page 32 .
Used to activate or deactivate the ZONE MODE working program - see “ZONE OPERATION
ENABLE MENU (GENERAL CONFIG)” on page 33 .
MAIN MENU (GENERAL SETS)
Proceed as follows to view the “MAIN” menu:
1. Display the "GENERAL MACHINE SETTINGS" menu, see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “GENERAL SETS” menu - see “GENERAL SETS MENU (PARAMETERS)” on page 18 .
5. Using buttons (1) and (2) ( Fig.1 ) select the "GENERAL main" screen ( Fig.2 ) and press button (3) to confirm
the display ( Fig.1 ).
2
1
1
Main
2
General
LANGUAGE SELECTION MENU (GENERAL MAIN)
Proceed as follows to change the display language:
1. Display the "GENERAL MACHINE SETTINGS" menu, see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “GENERAL SETS” menu - see “GENERAL SETS MENU (PARAMETERS)” on page 18 .
5. Display the “MAIN” menu, see “MAIN MENU (GENERAL SETS)” on page 19 .
6. Using buttons (1) and (2) ( Fig.1 ) select the "LANGUAGE SELECTION" screen ( Fig.2 ).
7. As soon as the “LANGUAGE SELECTION” screen ( Fig.2 ) is displayed, select the language of the control
display using buttons (3) and (4) ( Fig.1 ).
N.B.: the selected language will be visible in the text string (5) in the lower part of the screen ( Fig.2 ).
8. Confirm the selected language by pressing the button (6) ( Fig.1 ).
Page 19