Fimap GMG PRO, Operator Interface Manual

Page: 33 / 68

ZONE OPERATION ENABLE MENU (GENERAL CONFIG)
To manage the side brush "ZONE OPERATION ENABLE" function, carry out the following:
1. Display the "GENERAL MACHINE SETTINGS" menu, see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “GENERAL SETS” menu - see “GENERAL SETS MENU (PARAMETERS)” on page 18 .
5. Display the “CONFIG” menu, see “CONFIG MENU (GENERAL SETS)” on page 29 .
6. Using buttons (1) and (2) ( Fig.1 ) select the "ZONE OPERATION ENABLE" screen ( Fig.2 ).
7. As soon as the “ZONE OPERATION ENABLE” appears ( Fig.2 ), use the buttons (3) and (4) ( Fig.1 ) to select
the management of the “PROGRAM ZONE” program (see “PROGRAM ZONE WORKING PROGRAM” on
page 63 of the machine use and maintenance manual).
N.B.: the selected parameter will be visible in the text string (5) in the lower part of the screen ( Fig.2 ).
8. Confirm the selected hour meter by pressing the button (6) ( Fig.1 ).
2 4
1 3
6
1
General
Config
Zone operation enable:
Yes
2
5
N.B.: Selecting "No" disables the PROGRAM ZONE working program, while selecting "Yes" enables the
program.
Page 33