Fimap GMG PRO, Operator Interface Manual

Page: 23 / 68

The following can be selected in the battery type selection menu:
36Pb60 36Gel80
36Gel60 36Custom
36PP 36LiPo
36Pb80
N.B.: the standard battery type selected is 36Pb80.
CUSTOM LEVEL MENU (GENERAL BATTERY)
Proceed as follows to change the type of custom battery discharge curve:
1. Display the "GENERAL MACHINE SETTINGS" menu, see “SETTINGS MENU” on page 9 .
2. Display the “SERVICE” menu - see “SERVICE MENU” on page 16 .
3. Display the “PARAMETERS” menu - see “PARAMETERS MENU (SERVICE)” on page 17 .
4. Display the “GENERAL SETS” menu - see “GENERAL SETS MENU (PARAMETERS)” on page 18 .
5. Visualise the “BATTERY” menu - see “BATTERY MENU (GENERAL SETS)” on page 22 .
6. Using buttons (1) and (2) ( Fig.1 ) select the "LANGUAGE SELECTION" screen ( Fig.2 ).
7. As soon as the “LANGUAGE SELECTION” screen ( Fig.2 ) is displayed, select the language of the control
display using buttons (3) and (4) ( Fig.1 ).
N.B.: the percentage of chemical product will be visible in the text string (3) in the lower part of the screen
( Fig.2 ).
8. Confirm the set value by pressing the button (6) ( Fig.1 ).
General
Battery
33.5 [V]
Custom level 5/5:
min:15.0 max:40.0
2
5
2 4
1 3
6
1
N.B.: the increase in the percentage takes place in steps of 0.1V at a time, the minimum allowed value is
15.0 while the maximum allowed value is 40.0.
N.B.: to create the discharge curve, there are six levels to enter, from Custom Level 5/5 to Custom Level 0/5.
Page 23