Festo — MSE6-E2M — 2022-08d
Malfunctions
77
Error
channel
Meaning
Remedy
Enable parameter
m = module
number 1
Error number 25, error with the parameterisation of the upper limit value;
Depending on the parameterisation, the module reports the error when monitoring is activated.
Input signals will, however, still be processed. The parameter values entered will be ignored. The
module operates internally with the last valid parameter values.
Em.0
An error has
occurred in the set-
ting of the upper
limit value flow rate
parameter
–
Check parameterisation and param-
eterise again with correct parame-
ters
Monitoring: 4828 +
m * 64 + 0, bit
7, monitoring param-
eter error
Em.2
An error has
occurred in the set-
ting of the upper
limit value pressure
parameter
Em.3
An error has
occurred in the set-
ting of the upper
limit value pressure
change parameter