Festo — MSE6-E2M — 2022-08d
Parameterisation
57
8.6.6
Faultless commissioning, normal operating status
After faultless commissioning, specific LED displays on the bus node light. The other LEDs are for
diagnostics and error handling
LED displays
Description
Operating status
NF
PS
The following LEDs are green:
–
PS
–
PL
–
TP1
–
TP2
Normal, no error
M/P
PL
TP1
SF
TP2
M
Tab. 41: Normal operating status of the energy efficiency module with bus node CPX(-M)-FB44
LEDs TP1 and TP2 light when the port is in use. On means that the network connection is OK.
The M LED lights or flashes if parameterisation is changed or Force is active.
The following LEDs are off:
–
NF
–
M/P
–
SF
9
Parameterisation
9.1
Options for parameterisation
Overview
The parameters can be set via the fieldbus interface or service interface. The parameterisation can be
set at the service interface with the ‘Festo Maintenance Tool, CPX-FMT’ or the ‘Festo Automation Suite’
software.