Festo MSE6-E2M, Operating Instruction

Page: 64 / 84

64 Festo — MSE6-E2M — 2022-08d
Parameterisation
Module parameter: unit consumption
Function number 4828 + m * 64 + 8 m = module number 1
Description Specifies the unit for all consumption-related data.
Bit Bit 4, 5: unit consumption
All other bits are reserved.
Bit 5 4 Value Meaning
0 0 0 l, default
0 1 1 m³
1 0 2 scf
1 1 3 Not permissible
Comment If parameter monitoring is active, Pm.0.7, invalid values will result in parameter-
isation error FN29
è
10.2 Error numbers.
Tab. 49: Unit consumption module parameter
Module parameter: unit flow standard
Function number 4828 + m * 64 + 8 m = module number 1
Description Sets the flow rate standard for all flow-related and consumption-related data.
Bit Bit 6, 7: flow rate standard
All other bits are reserved.
Bit 7 6 Value Meaning
0 0 0 DIN 1343, default
0 1 1 ISO 2533
1 0 2 ISO 6358
1 1 3 Not permissible
Comment If parameter monitoring is active, Pm.0.7, invalid values will result in parameter-
isation error FN29
è 10.2 Error numbers.
Tab. 50: Flow rate standard module parameter
Pressure change sample time module parameter
The parameter specifies the time of the measuring interval, during which the pressure values for the
calculation of the pressure change are determined. The set time corresponds to the parameterised
value, multiplied by 100 ms. The data width is 8 bits, 1 byte.