Festo 1971599, Manual

Page: 41 / 150

1. System overview CPX-FVDA-P2
1-11
Festo P.BE-CPX-FVDA-P2-EN en 1209NH English
1.1.2 Supported product designs from CPX
To control the output module CPX-FVDA-P2, a PROFIBUS- or
PROFINET-capable bus node is required. The CPX terminal
must be equipped with one of the following bus nodes
(
name plate):
Bus nodes from Revision Network protocol
CPX-FB13 30 PROFIBUS
CPX-FB33 21 PROFINET IO
CPX-FB34 21 PROFINET IO
CPX-FB35 21 PROFINET IO
Tab. 1/4: Bus node for control of the CPX-FVDA-P2
The following product designs of the CPX terminal in combin-
ation with the named bus nodes support operation of the
output module CPX-FVDA-P2:
Product version Description
Electrical terminal CPX-M Modular electrical terminal CPX (without pneumatics modules)
Valve terminal type 32
– MPA-S-FB-VI Valve terminal MPA-S with CPX modular electrical peripherals
Valve terminal type 33
– MPA-FB-VI Valve terminal MPA-F with CPX modular electrical peripherals
Valve terminal type 34
– MPA-L-FB-VI Valve terminal MPA-L with CPX modular electrical peripherals