Festo 1971599, Manual

Page: 39 / 150

1. System overview CPX-FVDA-P2
1-9
Festo P.BE-CPX-FVDA-P2-EN en 1209NH English
Electronics module The electronics module includes the electronic components of
the output module. It is connected to the interlinking block
and the connection block by means of electric plug connect-
ors. The PROFIsafe address can be set directly at the electron-
ics module through a DIL switch (
chapter 2.4).
Electronics
module Type Description
CPX-FVDA-P2 – A digital output channel CH0 for switching off the load
voltage supply U
VAL
in the linking of the CPX terminals
1)
– Two digital output channels CH1 and CH2
2)
– Control of the digital output channels with safety-oriented
PLC via PROFIsafe
– Status and error display per output channel
– Module error display
– Max. load current at CH0, CH1 and CH2 (
Technical data).
– Electronic fuse as short circuit protection
– Mechanical coding prevents the electronics module from
being plugged into invalid interlinking blocks.
1)
All modules supplied via the load voltage supply U
VAL
of the CPX terminal are switched off in two
channels, P and M-sided.
2)
The connected external consumers are switched off in two channels, P- and M-sided.
The output channels 1 und 2 (CH1, CH2) are supplied from U
VAL
.
Tab. 1/2: Electronics module