Festo 1971599, Manual

Page: 94 / 150

3. Commissioning
3-4
Festo P.BE-CPX-FVDA-P2-EN en 1209NH English
Source Current versions of the GSDML/GSD files for CPX terminals
can be found on the Festo website at:
– www.festo.com/fieldbus
Import the GSDML/GSD file into the project of the configura-
tion program. After import, you can select the CPX terminal
with the output moduleCPX-FVDA-P2 in the configuration
program and edit it (e.g. set F-parameter).
Configuration, parametrisation and commissioning of the CPX
terminal with CPX-FVDA-P2 are dependent on the control sys-
tem used.
Detailed information can be found in the documentation of
the control system used and in the online help of the config-
uration software used.
Module identifiers
Each module has its own identifier (module identifier).
Apply the module identifiers – from left to right, correspond-
ing to the physical order as installed in the CPX terminal – in
your configuration program.
Module (order code) Module indicator
1)
Assigned IO bytes
2)
CPX-FVDA-P2 FVDO-P2 6 bytes O + 6 bytes I
1) Module identifier in the operator unit or in the hardware configuration of the programming soft-
ware
2) Four bytes each are used exclusively for PROFIsafe communication
Tab. 3/2: Module identifier of the output module CPX-FVDA-P2