OBID
i-scan
®
Manual
ID ISC.PRHD102
FEIG ELECTRONIC GmbH
Page 97 of 125
H71101-2e-ID-B.doc
8.1.8. [0x27] Write AFI
This command writes a new AFI code to one Transponders (or if using unaddressed mode and
there is more than 1 tag in field) codes to more than one Transponder.
The supported ISO15693 Host commands depends on the different ISO15693 Transponder Types,
which are described in chapter 9.2. Supported ISO Host commands for ISO15693 Transponders
REQUEST-DATA
6
7
(8...15)
9 / (16)
0x27
MODE
UID
AFI
RESPONSE-DATA (STATUS = 0x95)
7
ISO15693
ERROR
MODE:
Bit:
7
6
5
4
3
2
1
0
Function
0
0
0
0
0
ADR
ADR:
b000
non-addressed
b001
addressed
b010
selected
UID:
Read-only serial number of the Transponder. The UID is required only in the addressed
mode.
AFI:
Application Family Identifier of the Transponder.
ISO15693 ERROR:
ISO15693 ERROR code of Transponder response. This byte is only available if STATUS
= 0x95.
Note:
•
This command is only available for ISO15693 Transponders.
Summary of Contents for OBID i-scan ID ISC PRHD102
Page 77: ...OBID i scan Manual ID ISC PRHD102 FEIG ELECTRONIC GmbH Page 77 of 125 H71101 2e ID B doc...
Page 78: ...OBID i scan Manual ID ISC PRHD102 FEIG ELECTRONIC GmbH Page 78 of 125 H71101 2e ID B doc...
Page 79: ...OBID i scan Manual ID ISC PRHD102 FEIG ELECTRONIC GmbH Page 79 of 125 H71101 2e ID B doc...
Page 80: ...OBID i scan Manual ID ISC PRHD102 FEIG ELECTRONIC GmbH Page 80 of 125 H71101 2e ID B doc...
