Feig Electronic OBID i-scan ID ISC PRHD102, Manual

Page: 29 / 125

OBID i-scan
®
Manual ID ISC.PRHD102
FEIG ELECTRONIC GmbH Page 29 of 125 H71101-2e-ID-B.doc
Notes:
•
Scan-Mode (reading of serial number and data):
if the serial number was read OK and the data not, no data set will be transferred, but the assigned LED will
be active.
•
LED green and LED red are blinking alternately if a read error of the EEPROM occurred.
After power-up or a 6.3. [0x63] RF Controller Reset command all LEDs are blinking for 2
seconds
•
4.3.1. Dedicated Input / Output Functions
LED Color Dedicated Function
1 green
1. The Reader is initializing after power up or a 6.3. [0x63] RF
Controller Reset command.
2. 1 second blink.
3. Alternately blink with red LED after an EEPROM error.
2 blue
1. The Reader is initializing after power up or a 6.3. [0x63] RF
Controller Reset command.
2. The RF interface has an faultless communication with a Trans-
ponder.
3 yellow res.
5 red
1. The Reader is initializing after power up or a 6.3. [0x63] RF
Controller Reset command.
2. Signalize a low battery state