Feig Electronic OBID i-scan ID ISC PRHD102, Manual

Page: 65 / 125

OBID i-scan
®
Manual ID ISC.PRHD102
FEIG ELECTRONIC GmbH Page 65 of 125 H71101-2e-ID-B.doc
6.5. [0x66] Get Reader Info
This protocol allows you to determine, the Firmware version, its type and the types of the Trans-
ponders which are supported by the Firmware, and some other hard- and firmware options of the
Reader. Also the Device_ID can be determined.
Host
→
Reader
1 2 3 4 5 6 7,8
0x02 08 COM-ADR [0x66] MODE CRC16
MODE:
Via the Parameter MODE different information can be requested from the Reader.
0x00: General hard- and firmware information of the Reader Firmware
0x05: General firmware information of the Bootloader
0x10: Hardware information
0x80: Device-ID
These Information are necessary for some Firmware updates or Firmware up-
grades.
Host
←
Reader
Depending on the MODE Parameter the Reader response has a differing structure with
several information's:
6.5.1. Mode = 0x00 (Controller Firmware)
1 2 3 4 5 6 7…8
0x02 21 COM-ADR [0x66]
STATUS
1
SW-REV

9 10 11 12…13 14,15 16,17

D-REV HW-TYPE SW-TYPE TR-TYPE-HF RX-BUF TX-BUF

18,19 20,21

TR-TYPE-
UHF
CRC16
SW-REV:
Revision status of the Firmware. Depending on the Mode and Reader type different con-
troller’s are meant.
D-REV:
Revision status of the development Firmware. D-REV is set to ‘0’ in customized Firmware
revisions.