Feig Electronic OBID i-scan ID ISC PRHD102, Manual

Page: 52 / 125

OBID i-scan
®
Manual ID ISC.PRHD102
FEIG ELECTRONIC GmbH Page 52 of 125 H71101-2e-ID-B.doc
4.17. CFG37: Transponder Parameters UHF
The parameters of the CFG37 configuration block contain general UHF Transponder settings.
Byte 0 1 2 3 4 5 6
Contents 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Default 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Byte 7 8 9 10 11 12 13
Contents 0x00 0x00 0x00 0x00 0x00 IDDIB 0x00
Default 0x00 0x00 0x00 0x00 0x00 0x00 0x00
IDDIB (Identifier Data Interpretation Byte) :
(Transponder.Miscellaneous.IdentifierInterpretationMode)
Defines in which way the Reader interprets and display the Identifier data read during in-
ventory process by using the inventory command or in Scan Mode.
0x00 – EPC
0x01 – do not use
0x02 – EPC and TID (UID)
Note:
If IDDIB is 0x02 then only the TID must be used to address commands (e.g. read,
write...) to the tag