Feig Electronic OBID i-scan ID ISC PRHD102, Manual

Page: 35 / 125

OBID i-scan
®
Manual ID ISC.PRHD102
FEIG ELECTRONIC GmbH Page 35 of 125 H71101-2e-ID-B.doc
4.8. CFG11: Scan Mode – Read Data
The parameters of the CFG11 configuration block contain Scan Mode settings. To enable Scan
Mode the SCAN-E bit in the READER-MODE register of the configuration block 4.2. CFG1:
Inter-
face must be set.
Byte 0 1 2 3 4 5 6
Contents TR-DATA-1
4
TR-DATA-2 TR-DATA-3 Bank DB-ADR 0x00
Default 0x71 0x00 0x00 0x01 0x0000
Byte 7 8 9 10 11 12 13
Contents 0x00 0x00 0x00 0x00 D-START D-LGT
Default 0x00 0x0004
TR-DATA
1 2
: (OperatingMode.ScanMode.Data…..)
Selects the data types for read operation.
Bit: 7 6 5 4 3 2 1 0
Function Exten-
sion
- - - Byte
Order
DB
- DB SNR
SNR (OperatingMode.ScanMode.DataSelector.Uid)
b0: no Serial Number will be stored
b1: Serial Number will be stored
DB (OperatingMode.ScanMode.DataSelector.Data)
b0: no data block will be stored
b1: data block will be stored
Byte Order DB (OperatingMode.ScanMode.DataSource.ByteOrder)
b0: MSB first
b1: LSB first
Extension
If this flag is set TR-DATA-2 is present
Notes:
•
If the bits UID and DB are set to 0, the scan-mode is switched off
4
A reasonableness check is performed by writing this parameter to the Reader. If an error occurs the Read-
er answers with STATUS = [0x11].