Feig Electronic OBID i-scan ID ISC PRHD102, Manual

Page: 105 / 125

OBID i-scan
®
Manual ID ISC.PRHD102
FEIG ELECTRONIC GmbH Page 105 of 125 H71101-2e-ID-B.doc
9.1. EPC Class 1 Commands
This commands supports the functions of the EPC class1 Gen 2 Transponder
9.1.1. [0x18] Kill
This command writes one or more data blocks by using the Block write command of C1G2 Trans-
ponder or using the kill command for C1G1.
REQUEST-DATA
6 7 1 Byte EPC_LNG
Bytes
0x18 MODE EPC_LF EPC

1 Byte K_PW_LNG
Bytes

K_PW_LNG K_PW
MODE:
Bit: 7 6 5 4 3 2 1 0
Function 0 0 0 EPC_LF ADR
ADR:
b000 non-addressed
b001 addressed
EPC_LF:
If this bit is set the parameter EPC_LNG must inserted into the protocol.
b1: The protocol includes the parameter EPC_LNG. The EPC has a variable
length as defined in EPC_LNG.
EPC_LNG:
Is a optional parameter and depends on the setting of EPC_LF (see MODE). EPC_LNG
defines the length of the following EPC field.
EPC:
EPC of the Transponder. The EPC is required only in the addressed mode.
K_PW_LNG:
Length of Kill Password.
K-PW:
Kill Password.