Feig Electronic OBID i-scan ID ISC PRHD102, Manual

Page: 88 / 125

OBID i-scan
®
Manual ID ISC.PRHD102
FEIG ELECTRONIC GmbH Page 88 of 125 H71101-2e-ID-B.doc
8.1.3. [0x22] Lock Multiple Blocks
This command locks one or more data blocks.
The supported ISO15693 Host commands depends on the different ISO15693 Transponder types,
they are described in chapter 9.2. Supported ISO Host commands for
ISO15693 Transponders .
Note:
This command is only available for ISO15693 Transponders.
REQUEST-DATA
6 7 (8...15) 8 / (16) 9 / (17)
0x22 MODE UID DB-ADR DB-N
RESPONSE-DATA (STATUS = 0x03)
7
DB-ADR-E
RESPONSE-DATA (STATUS = 0x95)
7 8
ISO15693
ERROR
DB-ADR-E
MODE:
Bit: 7 6 5 4 3 2 1 0
Function 0 0 0 0 0 ADR
ADR:
b000 non-addressed
b001 addressed
b010 selected
UID:
Read-only serial number of the Transponder. The UID is required only in the addressed
mode.
DB-ADR:
First block number to be locked. First block can be any value between 0 and 255.
DB-N:
Number of data blocks to be locked, starting at DB-ADR. The maximum number of DB-N
is 255
ISO15693 ERROR:
ISO15693 ERROR code of Transponder response. This byte is only available if STATUS =
0x95.
DB-ADR-E:
Block number where the error occurred.
Note:
•
This command is only available for ISO15693 Transponders.