Feig Electronic OBID i-scan ID ISC PRHD102, Manual

Page: 109 / 125

OBID i-scan
®
Manual ID ISC.PRHD102
FEIG ELECTRONIC GmbH Page 109 of 125 H71101-2e-ID-B.doc
Supported ISO Host commands
9.2. Supported ISO Host commands for ISO15693 Transponders
The command codes listed in the following table supports the various Transponder commands and
operations that are available for each ISO15693 Transponder type.
9.2.1. EM4135 EM MICROELECTRONIC
IC manufacturer identifier: 0x16
memory organization:
36 x 8 Byte = 2304 Bit
Number of blocks 48 (user area: 13...48)
Block size 8 byte
WR-OPTION
*
0
Command
Code
Function Mode Comment
non-
addressed
addressed select
0x01 Inventory
√
- -
0x02 Stay Quiet
√
-
√
-
0x22 Lock Multiple Blocks
√ √ √ √
0x23 Read Multiple Blocks
√
-
√ √
Security Status is always
0x00
0x24 Write Multiple Blocks
√ √ √ √
0x25 Select
√
-
√
-
0x26 Reset to Ready
√
-
√ √
0x27 Write AFI - - - - -
0x28 Lock AFI - - - -
-
0x29 Write DSFID - - - -
0x2A Lock DSFID - - - -
0x2B Get System Information
√ √ √ √
0x2C
Get Multiple Block Secu-
rity Status
- - - -
∗
The WR-OPTION will be set automatically by the FEIG Readers if the RW-OPTION parameter in “4.5. CFG4:
Transponder Parameters” is set to “00: automatically set”.