Feig Electronic OBID i-scan ID ISC PRHD102, Manual

Page: 15 / 125

OBID i-scan
®
Manual ID ISC.PRHD102
FEIG ELECTRONIC GmbH Page 15 of 125 H71101-2e-ID-B.doc
Example 5:
COM-
ADR
Separation
Character
Header UID
Separation
Character
Data-
Blocks
END Character
COM-
ADR
SEP-CHAR USR1 USR2 USR3 USR4 UID SEP-CHAR DB USR
1
USR
2
USR
3
Scan-Mode via USB-Interface (HID-Mode):
If an USB-Reader is set to Scan-Mode the reader works like a keyboard. The data will be trans-
ferred as USB Key Code or as hex-values.
The user defined Sep- and End- Character will be transfered as USB Key Code.
If the number of transmitted user data is too large, only the maximal number of transmitted data will
be sent plus the end character. (see: 4.10. CFG13: Scan-Mode )
Note:
•
If configuration protocols shall be sent to the Reader while the Scan-Mode is active, no
Transponder should be within the detection range of the Reader during this time.
•
Only read operations are available with the Scan-Mode.