EOBD CODE READER - LIVE DATA
MODEL NO:
VS8812.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
I
MP
PO
R
RTA
TANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
TH
HE
P
PR
O
ODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PE
ER
S
SON
NAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING!
To prevent personal injury or damage to vehicles and/or the scan tool, read this instruction manual fi rst and observe the
following safety precautions.
Always perform automotive testing in a safe environment.
Wear safety eye protection.
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
Operate the vehicle in a well ventilated work area. Exhaust gases are poisonous.
Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components
create hazardous voltages when the engine is running.
Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and make sure the parking brake
is
engaged.
Keep
a
fi re extinguisher suitable for petrol/chemical/electrical fi res nearby.
DO NOT
connect or disconnect any test equipment while the ignition is on or the engine is running.
2. INTRODUCTION
Save time and money and take the guesswork out of your fault-fi nding and diagnosis. Allows interrogation of the vehicle’s ECU to determine
the performance of essential emission-based information, to read and clear Diagnostic Trouble Codes (DTCs) and to obtain vital performance
data from the vehicle’s engine and transmission (Petrol 2000 onwards and Diesel 2003 onwards).
3. SPECIFICATION
Model No: ............................................................ VS8812.V2
Application(s): ............. All petrol 2000 on and diesel 2003 on
............................................ OBDII/EOBD compliant vehicles
Function descriptions: ...........................Function applications
Works on all (petrol 2000 on and diesel 2003 on)
OBDII/EOBD compliant vehicles: ..................................... Yes
Scans for Diagnostic Trouble Codes (DTC) -
The cause of the ‘Engine and Transmission’
Malfunction Indicator Light’ (MIL): .................................... Yes
Scans for pending DTCs: ................................................. Yes
Retrieves generic (P0, P2, P3 & U10) and
Manufacturer specifi c (P1, P3 & U1) DTCs: ..................... Yes
Turns o
ff
MIL light, clears DTCs and resets monitors: ...... Yes
Displays DTC defi nitions on screen: ................................ Yes
View freeze-frame data: ................................................... Yes
Displays monitor and I/M readiness status (emissions): ... Yes
Patented One-Click I/M readiness button (emissions):..... Yes
Retrieves vehicle information (VIN, CID & CVN): ............. Yes
Supports CAN and other current EOBD Protocols: .......... Yes
Supports the new extended sensor list
(SAE J1979 - 2007): ......................................................... Yes
Reads live ECU/PCM data stream: .................................. Yes
Displays live O2 sensor data: ........................................... Yes
Performs ‘modules present’ test: ...................................... Yes
VS8812.V2 Issue 1 18/06/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear eye
protection
