background image

VS8812.V2  Issue 1 18/06/21

Original Language Version

© Jack Sealey Limited

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

WEEE REGULATIONS

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment 
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid 
waste authority for recycling information.

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice.

Important

: No Liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Summary of Contents for VS8812.V2

Page 1: ...Keep a fire extinguisher suitable for petrol chemical electrical fires nearby DO NOT connect or disconnect any test equipment while the ignition is on or the engine is running 2 INTRODUCTION Save time and money and take the guesswork out of your fault finding and diagnosis Allows interrogation of the vehicle s ECU to determine the performance of essential emission based information to read and cle...

Page 2: ...tection tests for the cranking and charging systems of the vehicle 4 3 8 Multi language option 5 TOOL SETTINGS 5 1 SETUP 5 1 1 Language Selects desired language English is the factory default setting From language screen select language required 5 1 2 Unit of measure Selects desired measurement unit Metric is the factory default setting From measurement screen select measurement unit required metr...

Page 3: ...nd press enter The fault code definition will then be displayed providing additional information on where the DTC originated and the operating conditions that caused it to set 8 CRANKING SYSTEM TEST 8 1 On the reader s menu screen select Cranking Test and press ENTER to start the test 8 1 1 Start the engine when prompted The reader will then automatically complete the cranking test and display the...

Page 4: ...applicable into approved containers and dispose of the product and fluids according to local regulations WEEE REGULATIONS Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment WEEE When the product is no longer required it must be disposed of in an environmentally protective way Contact your local solid waste authori...

Reviews: